Scribing Paint (LAYOUT FLUID) LACKFABRIK BÄDER – 35 ml Dispensing Pen, Blue Transparent

What it is and what it’s used for

Scribing Paint (LAYOUT FLUID) is a ready-to-use contrast coating for marking metal workpieces in preparation for mechanical machining. It creates a clearly visible base for layout lines and process markings, making contours easier to read and control during further operations.

Why choose a 35 ml dispensing pen?

The pen format is designed for controlled, tidy application exactly where you need it—ideal for quick workstation marking, smaller areas, or when you want to avoid brush work and minimise overspread.

Typical applications

• applying layout/ink markings on metal workpieces prior to machining

• marking finished parts and packages using stencils

• accurate marking and application of cutting contours

Key benefits (as described by the manufacturer)

• fast drying on all metals

• forms an even coat in thickness and colour tone

• no flaking or embrittlement

• non-reflective finish

• exact marking and exact cutting contour

• especially suitable for forged and cast parts

Limitations and safety notes

• Classified under GB CLP as: Flam. Liq. 2 (H225), Eye Irrit. 2 (H319), STOT SE 3 (H336). Signal word: Danger. :contentReference[oaicite:1]{index=1}

• Single packagings <125 ml are restricted to professional users (as stated in the SDS). :contentReference[oaicite:2]{index=2}

Helpful process add-ons

• metal cleaner/degreaser for surface preparation

• workshop wipes for wiping excess and cleaning after marking

• protective gloves and tightly sealed safety glasses (PPE guidance in SDS)

Technical parameters

Storage

Keep container tightly closed. Store in a cool, well-ventilated place. Keep away from ignition sources (no smoking) and protect from direct sunlight. Always close containers tightly after removal of product. :contentReference[oaicite:3]{index=3}

FAQ

When is the pen a better choice than the 237 ml can?

When you need precise local application and fast marking without brush work—especially on smaller areas or during in-process checks.

Is it suitable for forged and cast parts?

Yes — the manufacturer specifically notes suitability for forged and cast parts. :contentReference[oaicite:4]{index=4}

Is it flammable?

Yes — it is classified as a highly flammable liquid and vapour; follow SDS safety guidance. :contentReference[oaicite:5]{index=5}