Sikagard 6060 1L spray-on underbody protective coating, durable bitumen-based, good adhesion
Product code: 440119
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
SikaGard-6060 black 1 L is a spray-applied thixotropic bituminous coating designed to protect vehicle underbodies from corrosion and road noise. It forms a durable, flexible film resistant to salt and moisture.
Benefits and Unique Features
- Non-drip and non-run – precise application control
- Good adhesion to metals, coatings and PVC without primer
- Sound-damping properties – reduces road noise
- Resistant to road salt and weathering
- Buildable in multiple coats for increased film thickness
- Airless spray application possible
Properties and Applications
- Chemical base: thixotropic bitumen solution
- Color: black
- Density (uncured): 1.1 kg/l
- Solid content: 65 %
- Application temperature: +15 to +25 °C
- Film thickness (wet/dry): 600 µm / 400 µm
- Dry-to-touch time: 75 min
- Full cure time: 3.5 h
- Service temperature: –25 to +80 °C
- Applications: underbody, wheel arch and cavity protection
Technical Specifications
| Parameter | Value |
|---|---|
| Pack size | 1 L |
| Base | Bitumen, thixotropic |
| Density | 1.1 kg/l |
| Solid content | 65 % |
| Wet/Dry film | 600 µm / 400 µm |
| Dry-to-touch | 75 min |
| Full cure | 3.5 h |
| Temperature range | –25 to +80 °C |
| Shelf life | 24 months |
Storage Recommendations
Store in a dry place at +5 to +25 °C, protected from frost and direct sunlight. Keep container tightly closed.
Instructions for Use
- Clean, degrease and dry all surfaces.
- Shake container approximately 40 times before use.
- Apply with an airless spray gun (3–6 bar) from 25 cm in a cross-hatch pattern.
- For thicker build, allow previous coat to dry before re-spraying.
- Mask off brakes, exhaust and engine components.
- Remove uncured material with Sika Remover-208; cured film only mechanical removal.
- Clean tools and skin with Sika Cleaner-350H and water.
Product safety
Responsible person in the EU
Sika Poland Sp. z o.o.
Karczunkowska 89
02-871 Warszawa, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
