Sikagard -6220 S amber C292 500ml anti-corrosion spray wax, for the protection of closed profiles, against rust, bodywork protection, high penetration, resistance to salt and water
Product code: 440222
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
SikaGard®-6220S amber C292 500 ml is a spray-applied, high-penetration wax solution designed to protect enclosed vehicle body profiles against corrosion. With exceptional crawl ability, it penetrates fine cavities to form a durable, flexible barrier resistant to water, road salt, and weathering.
Benefits and Unique Features
- Exceptional crawl ability into tight or hidden areas
- Excellent water and salt displacement
- No fogging or dripping during spray application
- Permanently elastic – resists cracking under temperature changes
- Low solvent usage (53 % solids content)
- Heat and weather resistant
Properties and Applications
- Chemical base: wax solution
- Colour: amber
- Density (uncured): 0.87 kg/l
- Solids content: 53 %
- Application temperature: +15 °C to +25 °C
- Wet/dry film thickness: 100 µm / 50 µm
- Dry time (touch-dry): 3 h
- Service temperature: –50 °C to +75 °C
- Applications: cavity protection, enclosed profile and hard-to-reach area corrosion prevention
Technical Specifications
| Parameter | Value |
|---|---|
| Pack size | 500 ml |
| Chemical base | Thixotropic wax solution |
| Density | 0.87 kg/l |
| Solids content | 53 % |
| Wet film thickness | 100 µm |
| Dry film thickness | 50 µm |
| Dry time (touch-dry) | 3 h |
| Application temperature | +15 °C to +25 °C |
| Service temperature | –50 °C to +75 °C |
| Shelf life | 24 months |
Instructions for Use
- Clean, degrease and dry all surfaces; remove rust, dust and oil.
- Shake the can vigorously (approx. 40 times) before use.
- Apply with an airless spray gun (3–6 bar) from about 25 cm, using a cross-hatch motion.
- If necessary, apply additional coats after the previous layer is fully dry.
- Mask off brake components, exhaust and engine parts before spraying.
- Remove uncured product with Sika® Remover-208; cured film must be removed mechanically.
- Clean tools and skin with Sika® Cleaner-350H and water.
Storage Recommendations
Store in a dry place at +5 °C to +25 °C. Protect from frost and direct sunlight. Keep container tightly closed in its original packaging.
Product safety
Responsible person in the EU
Sika Poland Sp. z o.o.
Karczunkowska 89
02-871 Warszawa, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
