Teroson EP 5010 TR 200 ml two-component body repair mass, soldering tin substitute, high adhesion to metals and aluminum, non-shrink, two-component resin, anti-corrosion protection and grinding
Product code: 2989853
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
Teroson EP 5010 200ml in a set with a nozzle 1 piece
Teroson EP 5010 TR – epoxy repair mass 200 ml
Teroson EP 5010 TR is a high-quality, two-component repair mass based on epoxy resins, intended for precise repair and reconstruction of metal surfaces. It is an excellent alternative to traditional tin soldering, combining durability, corrosion resistance and ease of mechanical processing.
Product advantages
- Non-shrink formula - does not change volume after curing.
- Excellent adhesion to steel and aluminum.
- Great grinding and surface reconstruction properties.
- High resistance to corrosion and weather conditions.
- Does not contain lead, isocyanates or solvents.
- Easy application and modeling - does not flow during work.
- Possibility of accelerating curing at elevated temperatures.
Application
Teroson EP 5010 TR is widely used in car body repairs, in including:
- Repair and reconstruction of damaged metal surfaces.
- Filling and smoothing of cavities in steel and aluminum.
- Replacing traditional tin soldering.
- Repair of car body elements.
Technical properties
| Property | Parameter |
|---|---|
| Chemical base | Epoxy resin |
| Color | Gray (after mixing) |
| Mixing ratio (by volume) | 2:1 (resin : hardener) |
| Working time | 90 minutes (at 23°C) |
| Full cure | 24 hours (23°C) / 1 hour (60°C) |
| Application temperature | 10°C – 35°C |
| Working temperature range | -40°C to +90°C |
| Density | 0.7 kg/l |
Application Method
- Clean the surface of oil, grease, dust and dirt.
- Remove layers of old paint or fillers down to bare metal.
- Prepare the surface by sanding and dusting.
- Mix the resin with the hardener (2:1 ratio) until a uniform color is obtained.
- Apply the material to the repaired surface, filling the gaps (layer thickness: 3-5 mm).
- Smooth the material with a putty knife, giving it the desired shape.
- Leave to cure at room temperature (24 hours) or accelerate the process at 60°C (1 hour).
Storage recommendations
- Store in the original, tightly closed packaging.
- Optimal storage temperature: 15°C - 35°C.
- Protect from moisture and heat sources.
- Do not return the used material to the original packaging.
User safety
When working with the product, use personal protective equipment: gloves, safety glasses and a dust mask.
Product safety
Manufacturer
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Responsible person in the EU
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
