Teroson EP 5055 250ml two-component structural epoxy adhesive for metal, steel and aluminum, for bonding roof coverings and panels, protects against corrosion, easy to use
Select product variant:
Individual variants may differ in price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Opis produktu
Properties
TEROSON EP 5055 is a solvent-free and two-component adhesive made on the basis of reinforced epoxy resins. The material copes very well with bonding, among others:
- pure metal
- aluminum alloys
- galvanized steel
- coated panels
TEROSON EP 5055 cures at room temperature, although this process can be significantly accelerated by causing a chemical reaction of both components of the adhesive by heating them. The material does not contain isocyanas or silicones. A big advantage is the fact that the hardened binder is hard, but not brittle.
Benefits of using
- prevents corrosion
- easy to use
- adheres to a wide range of materials
- does not contain solvent
- it is possible to weld points before curing
- has a neutral smell
- high strength
Use
TEROSON EP 5055 can combine a wide range of materials. It is designed mainly for gluing elements exposed to high dynamic loads. It works best in combination with spot welding or riveting.
| Specifications | |
|---|---|
| Colour | Dark grey |
| Odour | almost esoach-free |
| Solids | 100% |
| Key materials: | metals, aluminium |
| Substrates: | epoxy |
| Full curing time (depending on temperature) | 80°C - 60 min 23°C - up to 48h |
| Bond strength (depending on temperature) | ambient temperature: 18 to 22 Mpa at a higher temperature: > 20 Mpa |
| Endurance | High |
| Available packaging | 250 ml |
Instructions for use
- the surface must be dry and free of grease and dust. It is recommended to prepare the surface with TEROSON VR 10 / VR 20 remover
- it is recommended to use only pistols equipped with a piston rod
- before screwing in the static stirrer, a small amount of material should be squeezed out to ensure that both components are supplied at the same time
- after mixing, the adhesive is ready for use and should be used within 80 minutes
- to avoid displacement of the parts to be joined, it is recommended that they be fixed during the curing process (curing time depends on temperature)
Storage
Store in dry rooms at a temperature of 15 to 25 ºC. Storage at too low a temperature may cause crystallization of the components.
TEROSON EP 5055 can be stored for up to 12 months in its original packaging.
Product safety
Manufacturer
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Responsible person in the EU
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.

