Teroson EP 5055 200ml two-component epoxy adhesive for metal, steel, aluminum alloys, anti-corrosion
Product code: 2988279
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
Teroson EP 5055 200ml in a set with a nozzle 1 piece
Teroson EP 5055 is a two-component epoxy adhesive that does not contain solvents and is characterized by high strength and excellent corrosion protection properties. The product was designed for use in the automotive industry and repair shops, where high bonding strength and resistance to difficult working conditions are required. The adhesive provides excellent adhesion to steel, galvanized steel and aluminum alloys.
Application
- Bonding metal elements, including steel, galvanized steel and aluminum alloys
- Corrosion protection in automotive applications
- Body repair in car workshops
- Use in industry where high mechanical strength is required
Properties
- Two-component epoxy adhesive
- No solvents
- High corrosion resistance
- Excellent shear strength
- Possibility of accelerated curing at elevated temperatures
Parameters technical
| Parameter | Value |
|---|---|
| Base | Epoxy resin (part A), amine (part B) |
| Color | Black (part A), gray-green (part B) |
| Density | 1.0 g/cm³ (part A), 1.1 g/cm³ (part B) |
| Viscosity (23°C) | 145 Pa·s (part A), 75 Pa s (Part B) |
| Mixing ratio (by volume) | 1:1 |
| Mixture color | Dark gray |
| Initial curing time | 4 hours at 23°C |
| Shear strength (DIN EN 1465) | 18-22 MPa |
| Full strength | 2 days at 23°C or 30 minutes at 100°C |
| Module E | 1 500 MPa |
Storage and handling recommendations
- Store between 15 and 25°C
- Avoid storage at temperatures below 0°C to prevent crystallization
- Shelf life is 12 months in original, unopened packaging
- Before use, thoroughly clean the bonding surface from oil, dust and grease
Safety
Before use, refer to the Safety Data Sheet (SDS) for full information on precautions and safety recommendations. The product should be applied in well-ventilated areas, avoid contact with eyes and skin, and in case of contact, immediately rinse the area with plenty of water.
Product safety
Manufacturer
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Responsible person in the EU
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
