WEICON Zinc-Galva Spray 400 ml, hot-dip zinc shade, fast-drying anti-corrosion spray for zinc and steel repair
Product code: 10052650
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
WEICON Zinc-Galva Spray 400 ml is a fast-drying protective coating in a hot-dip-galvanised shade, designed for durable corrosion protection of metal parts. The blend of zinc and aluminium pigments provides effective anti-corrosion performance and excellent adhesion on steel and zinc – for service and production, indoors and outdoors.
Benefits and key features
- Colour tone close to hot-dip galvanising – neat repair of zinc coatings
- Fast drying and high adhesion to metals
- Resistant to weathering, fresh and salt water
- Can act as a conductive layer for spot welding
- Service use after welding, drilling and cutting
Properties and applications
- Zinc repair: colour matching and corrosion protection after machining.
- Anti-corrosion primer: effective base for subsequent topcoats.
- Outdoor duty: resistance to salt-spray and atmospheric exposure.
- MRO and production: railings, frames, body panels, HVAC installs.
- Metalworking: coating sections after welding and drilling; conductive for spot welding.
Technical parameters
| Parameter | Value |
|---|---|
| Colour | hot-dip-galvanised shade (grey-silver) |
| Net volume | 400 ml (aerosol) |
| State / appearance | spray coating (aerosol) |
| Odour | characteristic |
| Density (20 °C) | approx. 0.9–1.0 g/cm³ |
| Water solubility | immiscible |
| Vapour pressure | — |
| Kinematic viscosity (40 °C) | — |
| pH | — |
| Flash point | aerosol – extremely flammable |
| Thermal resistance of coating | -50 to +300 °C |
| Tack-free time | ~15 min |
| Full cure | ~12 h |
| Coverage (cross-spray 1.5×) | ~150 ml/m² (20–40 µm) |
| VOC content | ~87% (w/w) |
| Transport classification | UN1950, AEROSOLS, class 2.1 |
| CLP signal word | Danger |
| CLP classification (selected H) | H222, H229, H319, H336, H412 |
| Diisocyanate notice | not applicable |
Storage recommendations
Store upright, in a dry and cool place away from heat and ignition sources. Protect from sunlight and temperatures > 50 °C. Pressurised container – do not pierce or burn, even after use. Keep out of reach of children.
FAQ
1) Can Zinc-Galva Spray be over-coated?
Yes, once fully cured it can serve as an anti-corrosion primer for topcoats.
2) Typical uses?
Repair of zinc coatings, post-weld and post-drill protection, refurbishment of steel parts.
3) How fast does it dry?
Touch-dry in ~15 minutes; full cure ~12 hours.
4) Conductive for spot welding?
Yes – it may act as a conductive layer for spot welding.
5) Temperature resistance?
Approximately -50 to +300 °C.
Product safety
Responsible person in the EU
WEICON GmbH & Co. KG
Königsberger Str. 255
48157 Münster, Germany
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
