Molykote 41 silicone grease based on mineral oils and lithium soap, high temperature operation, for rolling bearings, drying chambers, anti-corrosive
Product code: 1500768q
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Select product variant:
Individual variants may differ in price
Secure purchase guarantee
Product description
Molykote 41
Molykote 41 is an extremely high temperature silicone grease that can be used at higher temperatures than standard silicone greases can withstand. With exceptional thermal stability and oxidation resistance, this grease is ideal for applications where other greases fail.
Applications
- Kiln conveyors
- Kiln trucks
- Molten salt pumps
- Steam turbine controllers
- Power switch edge cutters
Properties
- Does not melt, even at high temperatures
- Exceptional thermal stability
- Excellent oxidation resistance
- Water resistance
- PTFE and PFAS free
Technical data
| Parameter | Value |
|---|---|
| Color | Black |
| Base Oil Viscosity @ 25°C | 316 mm²/s |
| Working Penetration (JIS K 2220) | 260-300 mm/10 |
| NLGI Grade | 2 |
| Working Temperature Range | -20°C to +290°C |
| Density | 1.1 g/cm³ |
| Dropping point | None |
| Bleeding (150°C/24 hours, MIL S 8660) | 4.0% |
| Evaporation (150°C/24 hours, MIL S 8660) | 1.0% |
| Water wash-off (38°C/1 hour, JIS K 2220) | 0.5% |
| Weld Load (ASTM D2596) | 1500 N |
| Maximum DN | 75,000 mm/min |
Storage and Handling Recommendations
- Store in a cool, dark place in the original unopened container
- Shelf life is 60 months from the date of production
- Apply by brush, spatula or automatic lubrication device
- Do not use on painted surfaces or on steel bearings under high loads
Safety
Read the Product Data Sheet before using the product Safety Data Sheet (MSDS). The product should be used in accordance with the manufacturer's recommendations and occupational health and safety regulations. During application, appropriate personal protective equipment should be used to avoid contact with eyes and skin.
Product safety
Manufacturer
UNIVAR Poland Sp. z o.o.
Sławęcińska 14
05-850 Ożarów Mazowiecki, Poland
Responsible person in the EU
UNIVAR Poland Sp. z o.o.
Sławęcińska 14
05-850 Ożarów Mazowiecki, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
