Molykote D 7409 25kg anti-friction coating based on molybdenum disulfide and additives for metal-to-metal sliding and piston surfaces, corrosion protection
Product code: 1500779
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Select product variant:
Individual variants may differ in price
Secure purchase guarantee
Product description
Molykote D-7409
Molykote D-7409 is a high-performance Anti-Friction Coating designed for use in applications requiring excellent wear protection, corrosion protection and high load-bearing capacity. This product is cured at high temperature and forms a dry lubrication film that provides long-term lubrication under difficult operating conditions, such as high temperatures and low sliding speeds.
Applications
- Lubrication of metal/metal combinations in applications with low sliding speeds and high loads
- Protection of components exposed to friction at high temperatures
- Use in pistons and tappets of internal combustion engines, magnetic armatures of car starters and components of car hood locks
- Use where oils and greases cannot be used
Properties
- High wear resistance
- Temperature resistance from -70°C to +300°C
- Resistance to oils, greases and solvents
- High load capacity
- Protection against fretting corrosion
- Free of PTFE and PFAS
Technical parameters
| Parameter | Value |
|---|---|
| Color | Gray-black |
| Operating temperature range | -70°C to +300°C |
| Dynamic viscosity at 23°C | 400 mPas |
| Density at 23°C | 1.17 g/ml |
| Flash point | 35°C |
| Corrosion resistance without red rust (DIN 50021) | 250 hours |
| Weld load (ASTM D2625) | 8700 N (sandy) |
| Dynamic load (ASTM D7217) | 1900 MPa (sandy) |
Storage and use recommendations
- Store in original sealed container, at a temperature of 5°C to 23°C
- Shelf life is 36 months from the date of production
- Surfaces to be coated should be thoroughly cleaned and degreased
- Before use, mix the product thoroughly, apply evenly by spraying, immersion, centrifugal or brushing
- Typical curing conditions: 30 minutes at 220°C
Safety
Before using the product, read the Safety Data Sheet (MSDS). The product should be used in accordance with the manufacturer's recommendations and occupational health and safety regulations. During application, wear appropriate personal protective equipment to avoid contact with eyes and skin.
Product safety
Manufacturer
UNIVAR Poland Sp. z o.o.
Sławęcińska 14
05-850 Ożarów Mazowiecki, Poland
Responsible person in the EU
UNIVAR Poland Sp. z o.o.
Sławęcińska 14
05-850 Ożarów Mazowiecki, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
