MOLYKOTE D-7409 5 kg, heat-curing dry-film lubricant, oil/solvent-resistant, −70–300 °C, 5–20 µm, cure 220 °C
Product code: 1500780
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
MOLYKOTE D-7409 Anti-Friction Coating 5 kg is a heat-curing dry-film lubricant for metal. It combines excellent lubrication with corrosion protection and high wear resistance, ideal where conventional oils and greases are unsuitable.
Benefits and unique features
- High load-carrying capacity and wear resistance
- Resistance of the cured film to oils, greases and solvents
- Service temperature range −70 to +300 °C
- Reduces fretting and stick-slip
- Permanent lubrication under slow/oscillating motion
Properties and applications
- Typical uses: piston rings and tappets, starter armatures, hood/bonnet locks, highly loaded low-speed slides, oscillating or intermittent motion.
- Surface prep: thoroughly degrease; phosphating or ~180-grit blasting recommended to improve adhesion and service life.
- Application: spray (approx. 3–5 bar), dip, spin or brush; target 5–20 µm dry film.
- Curing: typically 30 min at part temperature 220 °C; short flash-off after application.
- Coverage & thinner: ~16 m2/kg at 10 µm; recommended thinner – MOLYKOTE 7415 Thinner.
Technical parameters
| Parameter | Value |
|---|---|
| Type | heat-curing dry-film lubricant |
| Colour | grey-black |
| Service temperature | −70 °C to +300 °C |
| Dynamic viscosity (23 °C) | ~400 mPa·s |
| Density (23 °C) | ~1.17 g/ml |
| Flash point | ~35 °C (Tag CC) |
| Recommended DFT | 5–20 µm |
| Coverage | ~16 m2/kg at 10 µm |
| Curing schedule | 30 min / 220 °C (part temperature) |
| Shelf life / storage | up to 36 months sealed at 5–23 °C |
| Transport | ADR/IMDG/IATA: UN 3295, class 3, packing group III (flammable liquid) |
| Pack size | 5 kg |
Storage recommendations
Store in the original tightly closed container in a dry, well-ventilated area. To maintain 36-month shelf life, keep at 5–23 °C; in general do not exceed 40 °C. Keep away from ignition sources and ground equipment during transfer; vapours may form explosive mixtures with air.
FAQ
1) Media resistance?
Cured film resists oils, greases and solvents.
2) Surface preparation?
Degrease; phosphating or ~180-grit blasting is recommended.
3) Thickness & curing?
5–20 µm dry film; 30 min/220 °C (part temperature).
4) Thinner?
Use MOLYKOTE 7415 Thinner.
5) Transport class?
UN 3295, class 3, PG III.
Product safety
Manufacturer
UNIVAR Poland Sp. z o.o.
Sławęcińska 14
05-850 Ożarów Mazowiecki, Poland
Responsible person in the EU
UNIVAR Poland Sp. z o.o.
Sławęcińska 14
05-850 Ożarów Mazowiecki, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
