Straight grease nipple M10x1 DIN 71412 A zinc-plated steel Melkib MB-0274
Product code: MB-0274
Leave feedback on the product
Related products
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Opis produktu
Melkib MB-0274 straight M10×1 grease nipple – DIN 71412 Form A type
Melkib MB-0274 straight M10×1 grease nipple is a metal lubrication fitting designed to supply grease to machinery components without the need for disassembly. Its conical-head configuration corresponds to the straight Form A design described in DIN 71412.
The grease nipple features an M10×1 metric thread, a zinc-plated steel body and a straight configuration for lubrication points with sufficient access above the fitting.
Applications of the M10×1 grease nipple
- Bearings – periodic grease replenishment at designated lubrication points.
- Pins and joints – maintenance of moving mechanical connections.
- Bushings and guides – grease delivery to components requiring regular maintenance.
- Industrial and agricultural machinery – replacement of grease nipples with the appropriate thread.
Construction and key features
- M10×1 thread – 10 mm nominal diameter and 1 mm pitch.
- Straight design – allows axial access with the grease gun coupler.
- Conical head – compatible with a suitable jaw-type grease gun coupler.
- Free-cutting steel – body material specified by the supplier.
- Zinc-plated finish – surface protection for the steel component.
- DIN 71412 Form A type – identifies the straight conical-head configuration.
DIN 71412 Form A and correct product selection
DIN 71412 describes grease nipples with conical heads. Form A identifies a straight fitting, while other forms include angled configurations.
Important: the reference to DIN 71412 Form A identifies the product design and does not, on its own, certify full dimensional compliance of this specific item. Check the actual dimensions or supplier documentation whenever strict standards compliance is required.
Straight grease nipples are also associated with PN/M-86002 in Polish technical documentation. PN/M-86003 is associated with angled configurations and should not be automatically assigned to this straight variant.
How to select and install an M10×1 grease nipple
- Check the thread specification in the machine documentation or on the removed component.
- Confirm that the fitting requires an M10×1 thread rather than M10×1.5.
- Make sure there is sufficient access for the grease gun coupler above the fitting.
- Compare the installation method and dimensions with the original grease nipple.
- Select a grease gun coupler suitable for the conical head.
Clean the threaded opening before installation. Start threading the fitting by hand to avoid cross-threading. After installation, verify the connection and grease delivery.
Technical specifications – Melkib MB-0274
| Parameter | Value |
|---|---|
| Melkib product code | MB-0274 |
| Variant designation | M101 |
| Product type | Grease nipple / lubrication fitting |
| Configuration | Straight |
| Design type | DIN 71412 Form A |
| External thread | M10×1 |
| Thread pitch | 1 mm |
| Material | Free-cutting steel |
| Finish | Zinc plated |
| Head type | Conical |
| Lubricant | Grease |
| Application | Point lubrication of machine components |
| Sales unit | 1 piece |
Storage
Store in a clean, dry place. Protect the thread, head and lubrication passage from damage and contamination. Inspect the fitting before installation.
FAQ – straight M10×1 grease nipple
Does the M101 grease nipple have an M10×1 thread?
Yes. The MB-0274 variant is designed for M10×1 threaded openings with a 1 mm pitch.
What does DIN 71412 Form A mean?
It identifies a straight grease nipple with a conical head. Full compliance of a specific product with the standard must be confirmed through documentation or dimensional verification.
Can an M10×1 grease nipple be installed in an M10×1.5 thread?
No. The thread pitches differ. Never force the fitting into an incompatible opening.
Is it suitable for pneumatic grease guns?
Yes, provided that a compatible jaw-type coupler for the conical head is used.
When should a straight grease nipple be selected instead of an angled one?
Choose a straight fitting when axial access is available. For restricted access, a 45° or 90° angled variant may be more suitable.
Product safety
Manufacturer
Melkib Klus Raczek Spółka Komandytowa
ul. Stawowa 91
43-400 Cieszyn, Poland
Responsible person in the EU
Melkib Klus Raczek Spółka Komandytowa
ul. Stawowa 91
43-400 Cieszyn, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
