Termopasty HP Thermal Conductive Paste 7 g tube in sachet 1.5 W/mK
Product code: AGT-284
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Opis produktu
Termopasty HP Thermal Conductive Paste 7 g tube in sachet 1.5 W/mK
Termopasty HP Thermal Conductive Paste 7 g is a silicone thermal paste designed to improve heat transfer between an electronic component and a heatsink or another cooling element. The product has thermal conductivity of 1.5 W/mK, is electrically non-conductive and helps protect components against overheating.
The 7 g version for article number ART.AGT-284 is supplied as a tube packed in an individual sachet. The new packaging allows the required product information and hazard labelling to be included, while keeping the convenient tube format for application.
Applications of Termopasty HP Thermal Conductive Paste 7 g
HP Thermal Conductive Paste 7 g is intended for devices that require effective heat dissipation. It can be used with processors, heatsinks, power modules, LEDs, electronic circuits, network devices, computer systems and other components where reducing operating temperature is important.
The product fills microscopic unevenness between the component surface and the heatsink, improving thermal contact and supporting stable device operation. Due to its electrically non-conductive properties, it can be used near sensitive electronic circuits.
What distinguishes Termopasty HP Thermal Conductive Paste 7 g
The key feature of the product is thermal conductivity of 1.5 W/mK, which supports effective heat dissipation from electronic components. The paste is white, has a density of 2.1 g/cm³ at 20°C and a wide operating temperature range from -50°C to 250°C.
The product is electrically non-conductive and resistant to moisture and external influences. The manufacturer also indicates resistance to various chemical substances, including acids, bases, salts, sulphur dioxide and ammonia.
When to choose HP Thermal Conductive Paste 7 g
The 7 g version is worth choosing when a convenient amount of thermal paste is needed for service, assembly or hobby work. The tube supports controlled application, and the 7 g quantity is suitable for regular but not intensive use.
HP paste is a good choice when the standard H thermal paste may be too basic and higher thermal conductivity is required. For more demanding applications requiring even higher thermal conductivity, the HPX version may be considered.
How to use HP thermal conductive paste
Before application, make sure that the component and heatsink surfaces are clean and dry. Apply a small amount of paste to the contact surface, then spread it evenly or press the heatsink according to the installation procedure for the device.
Do not apply too much paste, as excess material may reduce heat transfer efficiency. The layer should be thin, even and sufficient to fill microscopic unevenness between the surfaces.
Technical data of Termopasty HP Thermal Conductive Paste 7 g
| Parameter | Value |
|---|---|
| Manufacturer | AG TermoPasty |
| Product name | HP Thermal Conductive Paste |
| Article number | ART.AGT-284 |
| EAN code | 5901764325819 |
| Net content | 7 g |
| Packaging type | Tube in individual sachet |
| Collective packaging | 10 pcs zip-lock packaging / 250 pcs collective carton |
| Product type | Silicone thermal conductive paste |
| Thermal conductivity | 1.5 W/mK |
| Colour | White |
| Density at 20°C | 2.1 g/cm³ |
| Operating temperature range | from -50°C to 250°C |
| Electrical properties | Electrically non-conductive |
| Application | Processors, heatsinks, power modules, LEDs, electronic circuits, devices requiring heat dissipation |
| Resistance | Moisture, external influences, acids, bases, salts, sulphur dioxide, ammonia |
| Shelf life | 3 years |
Storage
Store in a well-ventilated, cool and dry place. Keep the packaging tightly closed when the product is not in use. Protect from direct sunlight.
FAQ
Is ART.AGT-284 still a 7 g paste?
Yes. The product content remains 7 g. The change concerns the packaging format: the new version is a tube packed in an individual sachet.
What is Termopasty HP Thermal Conductive Paste 7 g used for?
The product is used to improve heat transfer between an electronic component and a heatsink or another cooling element.
Does HP Thermal Conductive Paste conduct electricity?
No. HP paste is electrically non-conductive, so it can be used near sensitive electronic circuits.
What is the thermal conductivity of HP paste?
The thermal conductivity of Termopasty HP paste is 1.5 W/mK.
What temperature range does HP paste work in?
The product works in a temperature range from -50°C to 250°C.
How does HP paste differ from HPX?
HP paste has thermal conductivity of 1.5 W/mK. The HPX version is intended for more demanding applications and has higher thermal conductivity.
How should HP thermal paste be applied?
Apply a thin layer of paste to a clean and dry contact surface so that it fills microscopic unevenness between the component and the heatsink.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
