Medmix MFQX 08-24T green Quadro static mixer nozzle for 2K adhesives 490 ml, F-System 4:1 and 10:1, 24 elements, 8 mm, 155 mm

The green Medmix MFQX 08-24T 2K adhesive mixer is a Quadro static mixing nozzle designed for 490 ml F-System cartridges with 4:1 and 10:1 mix ratios. It provides accurate static mixing of two-component adhesives and sealants so that the material leaving the cartridge is homogeneous and ready for application. The mixer is ideal for professional bead dispensing in production, service and maintenance.

Advantages and unique features

• Compatible with 490 ml 2K cartridges in the F-System range.
• Supports two mix ratios – 4:1 and 10:1 – with a single mixer type.
• Twenty-four mixing elements ensure intensive and repeatable mixing of components A and B.
• Stepped outlet tip allows the bead width to be adjusted to the specific job.
• Approx. 8 mm outlet diameter and 155 mm length enable convenient application on larger surfaces.
• Single-use mixing nozzle – no cleaning required and reduced risk of contamination.

Properties and applications

• Mixing 2K adhesives and sealants: ensures correct combination of components in 4:1 and 10:1 cartridges and helps achieve the strength values specified by the adhesive manufacturer.
• Bead application: designed for uniform bead dispensing on profiles, frames, panels and other structural parts.
• F-System interface: suitable for cartridges with F-System Mixpac connection used in 490 ml 2K cartridge guns.
• Production and assembly: ideal for use in automotive, machinery, metal construction and composite bonding applications.
• Repair and service: useful in workshops, service centres and maintenance departments where repeatability and speed are crucial.

Technical data

Storage recommendations

Store Medmix MFQX 08-24T mixers in their original packaging in a dry, clean place, away from direct sunlight and heat sources. Protect the nozzles from deformation and damage to the connection. Keep out of the reach of children and use only with compatible 2K cartridges according to the adhesive manufacturer’s instructions.

FAQ

1) Which cartridges are compatible with the Medmix MFQX 08-24T mixer?
The nozzle is intended for 490 ml 2K cartridges in the F-System range equipped with the corresponding Mixpac connection.

2) Can one mixer handle different mix ratios?
Yes, the MFQX 08-24T works with cartridges at 4:1 and 10:1 mix ratios, making it suitable for many 2K adhesive systems.

3) Why use a stepped tip?
The stepped tip can be trimmed at the required step so you can set a narrower or wider bead depending on the application.

4) Is the MFQX 08-24T mixer reusable?
No, it is a single-use static mixer. Once the adhesive has cured inside the mixing channel, a new nozzle should be used to maintain mixing quality and cleanliness.