Synthetic compressor and vacuum pump oil ANDEROL C-NRT 150 ISO VG 150, chemically resistant to aggressive gases, 20 l

ANDEROL C-NRT 150 20 l is a synthetic compressor lubricant (ISO VG 150) also intended for vacuum pump applications. It is designed for industrial use where contact with (reactive) chemistries and aggressive gases cannot be avoided. Thanks to high thermal and oxidative stability, it helps keep the system clean, reduces deposits, and can contribute to extended maintenance intervals.

Advantages and unique features

• Chemically inert to acidic gases.
• No metal additives to interfere with catalytic processes.
• Extends maintenance intervals and lowers oil consumption.
• Greatly reduces fire and explosion hazard.
• Very good water separation (demulsibility).
• Detergency effect – eliminates lacquering and deposits.
• May help reduce energy consumption due to stable operating properties.

Properties and applications

• Application: recommended for centrifugal and screw compressors; also used for vacuum pump applications.
• Gases: recommended for use with, among others: air, nitrogen, helium, hydrogen, methane, propane, natural gas, bio gas, ethylene, carbon monoxide, carbon dioxide (dry), furnace (crack) gas, synthesis gas, hydrogen sulfide (dry), sulfur hexafluoride, fluoride gases, and butadiene.
• Temperature stability: nominal operating range from -40°C to 170°C.
• System cleanliness: detergent properties help prevent deposits and lacquering.
• Compatibility: synthetic hydrocarbon base – compatibility with paints, seals, gaskets and hoses is similar to mineral oils; no special precautions required when changing over from a mineral oil.

Technical parameters

Storage recommendations

Store in tightly closed original packaging, in a dry place, away from direct sunlight and heat sources. Prevent contamination (water, dust, other media). Follow the Safety Data Sheet (SDS) for detailed storage and handling guidance.

FAQ

1) What is ANDEROL C-NRT 150 designed for?
For centrifugal and screw compressors and vacuum pump applications.

2) What is the viscosity grade?
ISO VG 150.

3) What is the nominal operating temperature range?
From -40°C to 170°C.

4) Is it suitable for aggressive gases?
Yes – it is developed as a chemically inert lubricant for acidic gases and applications where contact with reactive chemistries cannot be avoided.