WEICON C 8-27 cable stripping knife for round cables 8–28 mm
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Opis produktu
WEICON C 8-27 – cable stripping knife for round cables 8–28 mm
WEICON C 8-27 is a professional tool for removing the outer sheath of round cables with diameters from 8 to 28 mm. The adjustable cutting depth allows users to adapt the blade to the cable sheath and helps reduce the risk of damage to the internal conductors.
Applications
- Removing outer sheaths from round cables.
- Preparing cables for electrical installation work.
- Industrial maintenance and electrical servicing.
- Cable preparation during equipment assembly and modernisation.
Key benefits
Adjustable cutting depth
The adjustment wheel at the end of the handle allows continuously variable blade depth settings.
Circular and longitudinal cutting
The self-rotating internal blade automatically adapts to the cutting direction, facilitating both circular and longitudinal cuts.
Precise cable preparation
Correct blade adjustment helps avoid damage to conductors beneath the cable sheath.
How to use
- Verify that the cable is fully de-energised.
- Check cable diameter and adjust blade depth.
- Position the tool and make a circular cut.
- Perform a longitudinal cut to release the sheath.
- Remove the sheath and inspect the inner conductors.
Technical specifications
| Parameter | Value |
|---|---|
| Manufacturer | WEICON |
| Model | No. C 8-27 |
| Product number | 10051157 |
| Cable diameter range | 8–28 mm |
| Blade adjustment | Continuously variable |
| Cutting modes | Circular and longitudinal |
| Blade mechanism | Self-rotating |
| Sales unit | 1 piece |
Storage and maintenance
Store in a dry location and protect the blade against damage. Remove insulation residues after use and check the cutting and adjustment mechanisms regularly.
FAQ
Which cables is WEICON C 8-27 suitable for?
Common round cables with an outside diameter of 8–28 mm.
Can the cutting depth be adjusted?
Yes. The blade depth is continuously adjustable.
Does the tool make longitudinal cuts?
Yes. The rotating blade supports circular and longitudinal cutting.
Can it be used on live cables?
No. WEICON states that the tool must only be used on de-energised cables and conductors.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.

