WIKO Super Glue 100 Long Life 50 g clear medium-viscosity cyanoacrylate instant adhesive
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Opis produktu
WIKO Super Glue 100 Long Life 50 g – clear medium-viscosity instant adhesive
WIKO Super Glue 100 Long Life is a one-component, ethyl cyanoacrylate adhesive designed for fast bonding of accurately fitting surfaces. Its medium viscosity allows controlled application, while the transparent formulation produces clean, nearly invisible bonds.
The Long Life range offers increased storage stability and moisture resistance compared with conventional instant adhesives. It is suitable for industrial assembly, maintenance, workshops and precision repairs.
What is included?
One 50 g bottle of WIKO Super Glue 100 Long Life with a Pin in Cap closure.
Activators, primers and cleaning products are not included.
Applications
Metal and plastic bonding
The adhesive is suitable for bonding closely fitting metal parts and many plastics. Low-surface-energy materials such as PE, PP and PTFE may require a dedicated primer and compatibility testing.
Rubber and elastomer components
It can be used for small rubber parts, seals and elastomer components. Applications exposed to significant flexing require consideration of the cured adhesive's mechanical properties.
Wood, cork, cardboard and porous substrates
WIKO Super Glue 100 Long Life can be used on leather, wood, cork, cardboard and other absorbent materials, provided the surfaces are suitable and the bond is tested beforehand.
Key benefits
Medium viscosity
With a viscosity of 80–130 mPa·s at 25°C, the adhesive offers controlled dispensing for thin and closely fitting joints.
Fast fixture time
Typical fixture times are 1–3 seconds on nitrile rubber and 24–40 seconds on stainless steel. Final strength is reached after approximately 24 hours, depending on conditions.
Long storage life
The Long Life formulation is designed to maintain performance during storage. The manufacturer specifies a maximum shelf life of up to 24 months under recommended conditions.
Moisture and temperature resistance
The cured adhesive provides enhanced moisture resistance, with a specified temperature resistance range from -40°C to +100°C.
Application instructions
- Clean both surfaces to remove dust, oil, grease and other contamination.
- Ensure the parts fit closely together.
- Apply a small quantity of adhesive to one surface.
- Bring the parts together and hold them in position until initial fixation occurs.
- Allow sufficient curing before applying the full operating load.
- Wipe excess adhesive from the dispensing tip and close the bottle tightly after use.
Avoid excessive adhesive application. Cyanoacrylates perform best in thin bond lines. White blooming may occur on certain sensitive surfaces.
Technical specifications
| Parameter | Value |
|---|---|
| Brand | WIKO |
| Manufacturer | GLUETEC |
| Product code | SG100LL.F50 |
| EAN | 4041464005701 |
| Net content | 50 g |
| Adhesive type | Cyanoacrylate |
| Chemical base | Ethyl cyanoacrylate |
| Colour | Clear |
| Viscosity at 25°C | 80–130 mPa·s |
| Density | 1.04–1.06 g/ml |
| Fixture time on NBR rubber | 1–3 seconds |
| Fixture time on stainless steel | 24–40 seconds |
| Lap shear strength on stainless steel | 15–25 N/mm² |
| Final strength | Approximately 24 hours |
| Temperature resistance | -40°C to +100°C |
| Packaging | Pin in Cap bottle |
| Shelf life | Up to 24 months under recommended conditions |
Storage
Keep the product tightly closed in its original packaging, protected from sunlight, heat and humidity. Refrigerated storage may be required to achieve the maximum shelf life. Confirm the exact temperature range using the latest technical data sheet for the supplied batch.
Safety information
Cyanoacrylate adhesives bond skin and eyes very quickly. Avoid contact with skin and eyes, ensure adequate ventilation and consult the current safety data sheet and CLP label before use.
FAQ
Can it bond metal and rubber?
Yes. The adhesive is designed for a variety of materials including metals, rubber and elastomers.
Is this a gel adhesive?
No. It is a medium-viscosity liquid adhesive, with a viscosity of 80–130 mPa·s.
How long does curing take?
Initial fixation may occur within seconds, while final strength generally develops over approximately 24 hours.
Can it bond polyethylene or polypropylene?
These substrates are difficult to bond. A compatible primer and preliminary testing may be necessary.
What does Long Life mean?
It refers to improved storage stability, with a manufacturer-specified shelf life of up to 24 months under recommended conditions.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.

