CYBERBOND CB 5600 500G LOW ODOUR CYANOACRYLATE ADHESIVE LOW BLOOMING LOW OUTGASSING HIGH VISCOSITY HB FULLER

CYBERBOND CB 5600 500G production pack for dosing and process repeatability

CYBERBOND CB 5600 is a LOW ODOUR cyanoacrylate adhesive based on an alkoxyester formulation. It is selected when the process requires a fast CA bond while helping to reduce blooming (white residue around the bond line), outgassing and odour. This offer is the 500G pack size, commonly chosen for production sites with stable consumption where dosing and standardisation are key.

Manufacturer: H.B. FULLER
Product: CYBERBOND CB 5600
Pack size: 500G
Store product ID: 15045078

The set includes a small applicator with a thinner and thicker conical tip, as well as an additional dispensing tip with a ball valve (for CA adhesives), known as a ball-valve tip.

Why choose the 500G pack

✅ better cost per gram for regular consumption

✅ fewer changeovers compared to small bottles

✅ easier to implement dosing and control the applied amount

✅ more consistent results when multiple operators follow one standard

LOW ODOUR low blooming what it means in practice

Low odour and low blooming CA formulations are often selected for visible joints and aesthetics. They help reduce the typical CA “white haze” around the bond line and limit outgassing. Please note that these benefits may come with lower ultimate strength compared to standard ethyl cyanoacrylates. If maximum strength is the priority, we can help you select an alternative grade.

High viscosity for controlled application

CB 5600 is a high viscosity grade that improves dosing control and reduces running. It also provides some gap filling capability in small clearances, which can support stable production work.

Typical production applications

CB 5600 is used for fast assembly steps where bond appearance matters and the process benefits from reduced blooming.

Example substrates referenced in technical data: steel, EPDM, ABS.

Process tips that improve repeatability

✅ use in well ventilated areas

✅ when needed install local exhaust at the workstation

✅ apply sparingly and consider dosing equipment for higher consumption

✅ keep relative humidity around 50–65% as recommended by the manufacturer

✅ use appropriate PPE and avoid absorbent gloves such as cotton

Technical parameters

Storage

Store in a cool and dark place in the original tightly closed container. Before use, allow the adhesive to reach room temperature for consistent viscosity and performance.

Related products

If you need a smaller pack for trials, sampling or occasional use, choose the 50G version:

[product id="15045079"]

For process support in demanding conditions, consider activator and primer products:

[product id="4938,4946"]

FAQ

Why choose 500G instead of 50G

Choose 500G for steady consumption in production, easier dosing, fewer changeovers and better economics. Use 50G for trials and lower consumption.

What does blooming mean

Blooming is the white residue that can appear around the bond line. It depends on dosage, ventilation, humidity and substrate. CB 5600 is designed to help reduce blooming, but correct application still matters.

Can I bond PP or PE with this adhesive

PP and PE typically require a primer. If you share your substrates and process conditions, we can help select the right system.