Divinol Paste SF 500 g chuck grease paste for CNC machine tools water resistant
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Opis produktu
Divinol Paste SF 500 g – chuck lubricating paste for lathes and CNC machine tools
Divinol Paste SF is a specialist lubricating paste manufactured by Zeller+Gmelin for power chucks, clamping elements and sliding surfaces in metalworking machine tools. It is designed for applications exposed to high mechanical loads and frequent contact with water or coolant emulsions.
The highly adhesive formulation contains light-coloured solid lubricants that support wear protection and help prevent fretting corrosion. Its resistance to washout makes it particularly useful for maintaining clamping mechanisms in turning and machining equipment.
What is included?
One original cartridge containing 500 g of Divinol Paste SF lubricating paste.
Dispensing equipment and additional application accessories are not included.
Applications of Divinol Paste SF
Lathe chucks and clamping jaws
The paste is formulated for movable chuck components and clamping mechanisms in lathes and CNC machining centres. It supports smooth operation of correctly maintained chuck mechanisms.
Clamping systems exposed to coolant emulsions
Divinol Paste SF provides lubrication on suitable sliding and clamping surfaces under high pressure loads, even where metalworking coolants are present.
Protection against fretting corrosion
The formulation helps protect closely fitted metal components against wear and corrosion associated with small relative movements and vibration.
Key properties and benefits
Excellent adhesion
The paste adheres well to lubricated surfaces and is intended for heavily loaded mechanical components.
Resistance to water and coolant washout
Its washout resistance helps maintain lubrication in machine tools exposed to water and metalworking emulsions.
Wear and corrosion protection
The solid lubricant additives support protection of sliding surfaces and reduce the risk of fretting corrosion.
High load-carrying capacity
The product achieves a four-ball weld load of 3000 N in the VKA test according to DIN 51350-4.
Wide operating temperature range
The specified service temperature range is -30°C to +250°C. Always check the machine or chuck manufacturer's lubrication requirements.
Application instructions
- Switch off and secure the machine tool before maintenance.
- Consult the chuck manufacturer's lubrication instructions.
- Clean the specified lubrication points according to the maintenance procedure.
- Apply the paste using suitable cartridge dispensing equipment.
- Follow the recommended lubrication quantity and service interval.
- Check correct assembly and clamping mechanism operation before restarting the machine.
Lubrication quantities and intervals depend on the specific chuck design, operating conditions and equipment manufacturer.
Technical specifications – Divinol Paste SF
| Parameter | Value |
|---|---|
| Manufacturer | Zeller+Gmelin GmbH & Co. KG |
| Brand | Divinol |
| Product | Paste SF |
| Product code | 24440LK-P001 |
| EAN | 4008394546018 |
| Product type | Specialist lubricating paste |
| Appearance | Light beige paste |
| Additives | Light-coloured solid lubricants |
| Operating temperature | -30°C to +250°C |
| Base oil viscosity at 40°C | 120 mm²/s |
| Unworked penetration DIN ISO 2137 | 280–320 × 0.1 mm |
| Water resistance at 90°C DIN 51807-1 | Rating 0 |
| Corrosion protection EMCOR DIN 51802 | 0/0 |
| Four-ball weld load DIN 51350-4 | 3000 N |
| Primary application | Chucks, clamping mechanisms and sliding surfaces in machine tools |
| Net weight | 500 g |
| Packaging | Cartridge |
Storage and safety
Store in the original, securely closed cartridge and protect from contamination. Follow the current safety data sheet and manufacturer instructions.
Avoid contact with skin and eyes. Read the product's hazard label and safety data sheet before use and wear appropriate protective equipment.
FAQ
What is Divinol Paste SF used for?
It is primarily used to lubricate lathe chucks, clamping elements and heavily loaded sliding surfaces in metalworking machine tools.
Is it suitable for CNC lathe chucks?
Yes, provided it meets the lubrication specifications of the specific chuck manufacturer.
Does it resist coolant emulsions?
Yes. High resistance to washout by water and emulsions is one of its principal properties.
What is its operating temperature range?
The specified range is -30°C to +250°C.
Is it a general-purpose grease?
No. It is a specialist paste developed primarily for clamping systems and sliding surfaces in metalworking equipment.
How much product is supplied?
One cartridge contains 500 g of Divinol Paste SF.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.

