TESA 53988 black PVC electrical insulation tape 19 mm x 20 m
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Opis produktu
TESA Professional 53988 – black PVC electrical insulation tape 19 mm × 20 m
TESA Professional 53988 tesaflex is a flexible electrical insulation tape made from soft PVC, designed for insulating, marking and bundling electrical wires and cables. The black variant, 19 mm wide and 20 m long, is suitable for electrical installation, maintenance and service applications.
The tape has a total thickness of 150 µm and uses a natural rubber adhesive offering very good initial tack. Its flexible backing conforms to the shape of wires and cable bundles.
TESA 53988 complies with IEC 60454-3-1 and has a dielectric breakdown voltage of 7000 V. This value represents a tested material property and does not automatically indicate the permissible operating voltage of an electrical installation.
What is TESA 53988 electrical insulation tape used for?
Insulating electrical wires and connections
The tape is intended for insulating wires and electrical insulation work in accordance with the requirements of the specific installation. Its flexible PVC backing makes wrapping cables and following their contours easier.
Bundling and organising cables
The tape can be used to group wires into bundles, organise cable runs and provide supplementary protection during installation and maintenance work.
Marking electrical wires
The black tape can be used for marking and identifying installation components where this is permitted by the applicable identification requirements. It does not replace mandatory colour identification of protective or neutral conductors.
Maintenance and repair work
TESA 53988 can be used for appropriately selected repair work, securing cable bundles and general assembly applications requiring a flexible single-sided PVC tape.
Key features of TESA Professional 53988
Flexible soft PVC backing: allows convenient wrapping of wires and conformity to irregular shapes.
150 µm total thickness: provides the total tape thickness specified by the manufacturer.
7000 V dielectric breakdown voltage: an electrical property confirmed in the current product documentation.
Natural rubber adhesive: provides very good initial tack and reliable adhesion to steel.
Humidity and abrasion resistance: supports use in appropriately selected operating environments.
Short-term temperature resistance: the manufacturer specifies resistance to temperatures up to +90°C for short periods.
Standards and certifications: the manufacturer specifies IEC 60454-3-1 and VDE, IMQ and SEMKO certifications, together with RoHS 2.0 and REACH conformity.
How to choose the right PVC electrical insulation tape
When selecting an electrical insulation tape, consider tape width, thickness, dielectric breakdown voltage, environmental exposure and the insulation requirements of the application.
The 19 mm × 20 m variant is designed for applications requiring a black electrical insulation tape with this specific width and roll length.
TESA 53988 is not a self-amalgamating tape. The manufacturer rates its water resistance as medium, so it should not be used as a standalone seal for joints intended for continuous immersion.
How to apply TESA 53988
Before application, ensure that surfaces are appropriately prepared, clean and dry. Wrap the tape to achieve suitable adhesion and coverage in accordance with the requirements of the intended application.
Work on electrical installations must comply with relevant safety procedures. The tape should not be used as a substitute for insulating components required by equipment design or applicable regulations.
Technical specifications – TESA 53988-00006-00
| Parameter | Value |
|---|---|
| Manufacturer / brand | TESA |
| Product series | Professional 53988 tesaflex |
| Manufacturer part number | 53988-00006-00 |
| Original catalogue description | SPVC Electrical Tape Black 20m × 19mm |
| EAN | 4042448434142 |
| Product type | Single-sided electrical insulation tape |
| Colour | Black |
| Width | 19 mm |
| Length | 20 m |
| Backing material | Soft PVC |
| Adhesive type | Natural rubber |
| Total thickness | 150 µm |
| Dielectric breakdown voltage | 7000 V |
| Tensile strength | 25 N/cm |
| Elongation at break | 150% |
| Adhesion to steel | 2.5 N/cm |
| Short-term temperature resistance | +90°C |
| Humidity resistance | Good |
| Water resistance | Medium |
| Abrasion resistance | Good |
| Standard / certifications | IEC 60454-3-1; VDE; IMQ; SEMKO |
| Sales unit | 1 roll |
Storage
Store the tape in conditions that protect it from contamination, moisture and excessive heat. Detailed storage conditions and shelf life should be determined using the manufacturer's current recommendations.
FAQ – Frequently asked questions
Can TESA 53988 be used to insulate electrical wires?
Yes. It is a PVC electrical insulation tape intended for this purpose. It complies with IEC 60454-3-1, although the application method must meet the requirements of the specific installation.
Does the 7000 V rating indicate the permissible operating voltage?
No. The 7000 V value refers to the dielectric breakdown voltage measured under test conditions. Permissible applications depend on relevant standards, insulation design and installation conditions.
How thick is TESA 53988?
The current manufacturer documentation specifies a total thickness of 150 µm, equivalent to 0.15 mm.
Can TESA 53988 be used for bundling cables?
Yes. Bundling and organising electrical wires and cables are among the applications specified by the manufacturer.
Is TESA 53988 waterproof?
The manufacturer rates humidity resistance as good and water resistance as medium. It should not be considered a replacement for a specialised seal designed for continuous water exposure.
Can TESA 53988 be used at 90°C?
The manufacturer specifies short-term temperature resistance up to +90°C. This does not establish a permissible continuous operating temperature.
Is TESA 53988 a self-amalgamating tape?
No. It is a single-sided electrical insulation tape made from soft PVC with a natural rubber adhesive.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.

