Skip to main content
Język Mobile
English €
Język i waluty desktop
English €

Free delivery from €600 More

Free delivery from €600 More

Free delivery from €600 More

Free delivery from €600 More

Open search engine
Search
Close search engine Clear Search
Products in the cart: 0. See details

KLÜBER ISOFLEX TOPAS NB 52 synthetic bearing grease NLGI 2 370 g

Manufacturer: Kluber (go to products)
Go to Product feedback
with VAT without VAT
Price €152.97
szt.
Ask about the product
Share
Availability:
Available 1-3 pcs
Shipping from €0.00 - Inpost courier (Poland)

Secure purchase guarantee

Autopay
Blik
Przelewy 24
Gpay

Opis produktu

KLÜBER ISOFLEX TOPAS NB 52 370 g – synthetic grease for rolling and plain bearings

KLÜBER ISOFLEX TOPAS NB 52 is an NLGI 2 synthetic lubricating grease designed for rolling and plain bearings, precision gears and selected industrial mechanisms. Its formulation, based on synthetic hydrocarbon oil and a barium complex soap thickener, provides good load-carrying capacity, resistance to water and other aqueous media, and corrosion protection.

The grease is designed for operating temperatures from -50°C to +120°C. Depending on the application conditions, particularly in enclosed mechanisms, it can tolerate short-term temperature peaks up to +150°C.

Product variant 0041310590 is supplied in a cartridge containing 370 g net weight. The product is intended for professional use.

Where is KLÜBER ISOFLEX TOPAS NB 52 used?

Rolling and plain bearings

ISOFLEX TOPAS NB 52 is designed for bearings operating at high speeds and under load, including at low temperatures. The special thickener contributes to load-carrying capacity and corrosion protection.

Precision industrial gears

The manufacturer specifies the lubrication of gear tooth surfaces in precision gear systems, including bevel gears in milling machines. Selection should take into account the gearbox design, operating conditions and equipment manufacturer's recommendations.

Electromechanical valve actuators

The grease can be used in selected electromechanical valve actuators requiring suitable lubrication properties and resistance to mechanical loads.

Mechanisms operating at low temperatures

The lower operating temperature limit of -50°C makes this product suitable for consideration in equipment requiring reliable lubrication under low-temperature conditions.

Key properties of ISOFLEX TOPAS NB 52

Water resistance: the special barium complex soap thickener provides good resistance to water and aqueous media.

Corrosion protection: the grease helps protect metal components of bearings and mechanisms against corrosion.

Oxidation stability: the product offers resistance to oxidation and ageing, supporting long-term operation in appropriately selected applications.

Load-carrying capacity: the formulation has been developed for loaded bearings and mechanically interacting surfaces.

Wide operating temperature range: suitable for temperatures from -50°C to +120°C, with short-term temperature peaks up to +150°C possible in specific applications.

Industrial applications: the grease is used in mechanical engineering and automotive applications.

When should you choose ISOFLEX TOPAS NB 52?

This product is worth considering when a lubrication point requires an NLGI 2 synthetic grease and the bearing or mechanism operates under load, at varying temperatures or in an environment exposed to water.

Before application, check the required rotational speed, mechanical load, temperature range, bearing design and type of lubricant previously used.

ISOFLEX TOPAS NB 52 and ISOFLEX TOPAS NB 152 should not be regarded as automatically interchangeable products. The two grades have different performance characteristics.

How to apply KLÜBER ISOFLEX TOPAS NB 52

According to the manufacturer, the grease can be applied using a spatula, brush, grease gun or a suitable cartridge-based dispensing system.

Before application, prepare the lubrication point appropriately and protect the grease against contamination. The amount of lubricant should be determined according to the equipment design and the manufacturer's instructions.

When changing lubricants, check compatibility with any remaining grease. Do not assume that greases containing different thickener types can be safely mixed.

Technical data – KLÜBER ISOFLEX TOPAS NB 52 370 g

Parameter Value
ManufacturerKlüber Lubrication
Product nameISOFLEX TOPAS NB 52
Product family number004131
370 g variant code0041310590
Product typeSynthetic bearing grease
Base oilSynthetic hydrocarbon oil
ThickenerBarium complex soap
Consistency gradeNLGI 2
ColourBeige
TextureHomogeneous, short-fibred
Operating temperature range-50°C to +120°C
Peak temperatureShort-term up to +150°C, depending on the application
Density at 20°CApprox. 0.96 g/cm³
Base oil kinematic viscosity at 40°CApprox. 30 mm²/s
Base oil kinematic viscosity at 100°CApprox. 5.9 mm²/s
Worked penetration at 25°C, DIN ISO 2137265–295 (0.1 mm)
Dynamic viscosity at 25°C and shear rate 300 s⁻¹4000–8000 mPa·s
Dropping point, DIN ISO 2176≥ 240°C
Corrosion protection, SKF-EMCOR, DIN 51802Corrosion rating 0
Water resistance, DIN 51807-1, 3 h at 90°C≤ 1-90
Speed factor n × dmApprox. 1,000,000 mm/min
Packaging370 g cartridge
Intended usersProfessional users

Storage

Store the product in a dry, frost-protected location in its original, tightly closed packaging. The manufacturer specifies a minimum shelf life of approximately 36 months from the date of manufacture, provided the recommended storage conditions are maintained.

Safety information

Product intended for professional use. ISOFLEX TOPAS NB 52 is a chemical mixture for which the available safety data sheet indicates acute toxicity hazards.

H302 + H332: Harmful if swallowed or if inhaled.

Read the current safety data sheet and product label before use. Do not eat, drink or smoke while handling the product. Use the required personal protective equipment and ensure adequate workplace ventilation.

Dispose of used grease and contaminated packaging in accordance with applicable waste management regulations.

FAQ – Frequently asked questions

Which bearings is KLÜBER ISOFLEX TOPAS NB 52 suitable for?

The manufacturer specifies rolling and plain bearings, including bearings operating at high speeds, under load and at low temperatures. Final selection should be based on the requirements of the specific equipment.

What is the operating temperature range of ISOFLEX TOPAS NB 52?

The operating temperature range is -50°C to +120°C. Short-term peak temperatures up to +150°C may be possible in certain applications. However, this is not the permissible continuous operating temperature.

Is ISOFLEX TOPAS NB 52 resistant to water?

Yes. Its barium complex soap thickener provides good resistance to water and aqueous media, as confirmed by the manufacturer's technical data.

Is the grease suitable for precision gear systems?

Yes. The manufacturer specifies lubrication of gear tooth surfaces in precision gear systems, including bevel gears in milling machines. The technical requirements of the particular gearbox must be checked before application.

What is the difference between ISOFLEX TOPAS NB 52 and NB 152?

Both products use synthetic base oils and barium-based thickeners, but they have different operating characteristics. NB 52 operates from -50°C to +120°C, while NB 152 operates from -40°C to +150°C. They should not be used interchangeably without assessing the application conditions.

Can the 370 g cartridge be used in a standard grease gun?

Compatibility depends on the cartridge dimensions and the grease gun design. Check that the dispensing equipment is suitable for this specific cartridge before purchasing.

Is ISOFLEX TOPAS NB 52 intended for professional users?

Yes. The available safety data sheet identifies the product as intended for professional use. Users should review the applicable safety precautions and current documentation before handling the grease.

Reviews

Number of ratings: 0
Rate and review
9c6bbe69b8411cc00518e8006a8f8b7b.webp
KLÜBER ISOFLEX TOPAS NB 52 synthetic bearing grease NLGI 2 370 g