Melkib M70A 50 ml green high-strength anaerobic threadlocker for metal threads up to M20
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Opis produktu
Melkib M70A 50 ml – green high-strength anaerobic threadlocker
Melkib M70A is a one-component, high-strength anaerobic threadlocking adhesive for securing metal threaded assemblies against loosening caused by vibration, shock and operational loads. It is designed for joints where a durable connection is required and routine disassembly is not intended.
The green fluorescent adhesive cures when confined between mating metal surfaces in the absence of air. It fills the spaces between thread flanks and helps prevent unintended loosening during machine operation.
What is included?
One 50 ml bottle of Melkib M70A high-strength threadlocker.
Colour: green. Intended for high-strength locking of metal threaded connections.
Applications
Industrial machinery and threaded fasteners
Suitable for high-load bolts, nuts and threaded connections in production machinery and mechanical equipment exposed to vibration.
Studs and permanently assembled connections
Designed for stud bolts and other threaded fasteners that do not require regular disassembly.
Maintenance and mechanical assembly
Useful in industrial maintenance, servicing and assembly of metal threaded components with nominal thread sizes up to M20.
Key benefits
High locking strength
The reference formulation provides a breakaway torque of 30–50 Nm under specified laboratory conditions. Disassembly may require heating and appropriate tools.
Anaerobic curing
The adhesive polymerises when oxygen is excluded and the material contacts metal, locking the mating threads in place.
Resistance to vibration
The cured material fills spaces within the threaded connection and helps reduce movement associated with vibration-induced loosening.
Temperature resistance
The reference operating temperature range after curing is -55°C to +150°C. Actual suitability must be assessed against the service conditions.
Application instructions
- Confirm that the threads are metallic and do not exceed M20.
- Remove oil, grease and contaminants from the thread surfaces.
- Apply enough adhesive to fill the thread interface after assembly.
- Assemble and tighten the joint according to the equipment manufacturer's requirements.
- Do not disturb the connection during curing.
- Allow sufficient time to develop the required strength before full loading.
Passive metals and low temperatures may increase curing time. A compatible anaerobic activator may be required under such conditions.
Technical specifications – Melkib M70A
| Parameter | Value |
|---|---|
| Brand | Melkib |
| Product code | M70A 50 ML |
| Adhesive type | High-strength anaerobic threadlocker |
| Volume | 50 ml |
| Colour | Green, fluorescent |
| Chemical base | Methacrylic anaerobic resin |
| Viscosity at 25°C | 400–700 mPa·s |
| Density | 1.07–1.11 g/ml |
| Maximum thread size | M20 |
| Handling cure time | 5–10 minutes |
| Functional cure time | 3–6 hours |
| Full cure time | 12–24 hours |
| Breakaway torque | 30–50 Nm |
| Prevailing torque | 30–50 Nm |
| Operating temperature | -55°C to +150°C |
| Optimum application temperature | Approximately +23°C |
Numerical values are based on the technical data sheet for WIKO 02K70, confirmed as having equivalent properties. The current Melkib M70A documentation and label should be checked before release.
Storage
Keep in the original packaging in a cool, dry location. The reference formulation has a shelf life of 12 months under optimum storage conditions of +23°C. Check the actual expiry date on the supplied bottle.
Safety and limitations
Consult the current Melkib M70A safety data sheet before use. Use only on suitable metal threads. Do not use in oxygen systems, applications involving strong oxidisers or metal-to-plastic joints without verified compatibility.
FAQ
Does M70A prevent bolts from loosening?
Yes. The adhesive is designed to secure metal threaded connections against loosening under vibration and mechanical loads.
What thread sizes are suitable?
The reference maximum size is M20.
How long does the adhesive take to cure?
Initial fixation takes approximately 5–10 minutes, while full curing takes 12–24 hours under reference conditions.
Can the secured joint be disassembled?
Disassembly is difficult because of the high locking strength and may require heating and specialised tools.
Can M70A be used on plastic threads?
No. Its primary application is metal-to-metal threaded joints.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.

