DuoXpand frame fixing 10×160 FUS, electro-galvanized, ETA, three embedment depths, for concrete and masonry, 50 pcs
Product code: 00562171
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
The DuoXpand 10 × 160 FUS frame fixing is a reliable anchor for multiple non-structural fixings in concrete and masonry. Its innovative lamella geometry and material mix provide secure expansion even near edges and in porous substrates.
Benefits and unique features
- Advanced expansion zone adapts to the base material and distributes loads evenly.
- Three selectable embedment depths (50 / 70 / 140 mm) for flexible usable length.
- ETA for multiple non-structural fixings in concrete and masonry.
- Lateral ribs prevent plug rotation during screwdriving.
- Pre-matched screw with TX40 drive and SW13 hex speeds up installation.
Properties and applications
- Applications: substructures in wood/metal, windows, gates and doors, cabinets, wall units, beams, TV brackets, wall claddings, brackets, cable ducts and trays.
- Base materials: concrete ≥ C12/15, solid brick, calcium-silicate blocks (solid and perforated), lightweight concrete, aerated concrete, dense natural stone, gypsum panels.
- Installation: through-installation; full-surface expansion in solid materials and form-fit anchoring in hollow masonry for uniform load transfer.
- Steel component: electro-galvanized steel.
Technical parameters
| Parameter | Value |
|---|---|
| European Technical Assessment | yes |
| Drill diameter (d0) | 10 mm |
| Min. hole depth for through-installation (h2) | 170 mm |
| Usable length at 50 mm embedment (tfix) | 110 mm |
| Usable length at 70 mm embedment (tfix) | 90 mm |
| Usable length at 140 mm embedment (tfix) | 20 mm |
| Plug length (l) | 160 mm |
| Drive / wrench size | TX40 / SW 13 |
| Steel finish | electro-galvanized |
| Packing / quantity | Folding box / 50 pcs |
| GTIN (EAN) | 4048962440324 |
Storage recommendations
Store dry and clean in the original packaging, away from UV and heat sources. Protect screws from corrosion and contamination.
FAQ
1) How to choose 50/70/140 mm embedment?
Select based on substrate and required loads — deeper embedment improves capacity in demanding materials.
2) What drill should I use?
Use a 10 mm drill; drill perpendicular and clean the hole before installation.
3) Can I install near edges?
Yes, the lamella geometry supports safe edge distances when following the ETA limits.
4) What does FUS mean?
Variant with a screw featuring SW hex and TX drive; steel component is electro-galvanized.
Product safety
Manufacturer
FISCHER POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ
Albatrosów 2
30-716 Kraków, Poland
Responsible person in the EU
FISCHER POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ
Albatrosów 2
30-716 Kraków, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
