Fischer SXRL 10 x 200 FUS frame fixing with hex-head screw 50 pcs
Product code: 00522726
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
Fischer SXRL 10 x 200 FUS – frame fixing with hex-head screw
Fischer SXRL 10 x 200 FUS is a long frame fixing for push-through installation, designed for multiple fastening of non-structural systems in concrete, masonry and aerated concrete. The 10 x 200 mm version is supplied with an electro-galvanized steel screw with a hexagonal head, integrated washer and TX40 drive. The sales pack contains 50 complete fixings.
Applications of SXRL 10 x 200 FUS
The SXRL system can be used, among other applications, for fastening façade, ceiling and roof substructures, windows, gates and doors, beams, cabinets, wall-mounted cupboards, wall claddings, metal brackets, supports and cable trays. The manufacturer particularly recommends the hex-head version with integrated washer for fixing metal components.
The European Technical Assessment covers, among other substrates, concrete from class C12/15, vertically perforated brick, aerated concrete, lightweight concrete blocks, solid and perforated sand-lime masonry units and solid brick. The manufacturer also specifies use in natural stone with a dense structure and solid gypsum panels.
How does the SXRL frame fixing work?
The fixing has two expansion zones. In hollow materials they help distribute loads evenly into the substrate, while in aerated concrete and solid materials they combine to form one long expansion element. Longitudinal ribs help prevent the fixing from rotating during installation.
Selecting the anchorage depth
For the SXRL 10 x 200 FUS version, the manufacturer specifies anchorage depths of 50, 70 or 90 mm. These correspond to usable fixture thicknesses of 150, 130 and 110 mm respectively. The correct configuration must be selected according to the substrate, fixture thickness and the requirements of the European Technical Assessment.
Technical data
| Parameter | Value |
|---|---|
| Manufacturer | fischer |
| Model | SXRL 10 x 200 FUS |
| Manufacturer article number | 522726 |
| Drill diameter d0 | 10 mm |
| Fixing length | 200 mm |
| Minimum drill hole depth for push-through installation h2 | 210 mm |
| Usable fixture thickness at 50 mm anchorage depth | 150 mm |
| Usable fixture thickness at 70 mm anchorage depth | 130 mm |
| Usable fixture thickness at 90 mm anchorage depth | 110 mm |
| Drive / spanner size | TX40 / SW13 |
| Screw material | electro-galvanized steel |
| Installation method | push-through installation |
| Packaging | box of 50 pcs |
| GTIN / EAN | 4048962181012 |
| European Technical Assessment | ETA-07/0121 |
| Declaration of Performance | DoP No. 0329 |
Storage
No specific storage conditions or storage temperature range are stated for this version in the manufacturer documentation reviewed for this description.
Selection and installation safety
The anchorage depth, fixing spacing, edge distances and permissible load must be selected in accordance with ETA-07/0121 and the relevant load table. Load capacity depends on the substrate and the conditions of the specific fastening.
FAQ
What drill bit is required for Fischer SXRL 10 x 200 FUS?
The manufacturer specifies a 10 mm drill hole. The minimum drill hole depth for push-through installation is 210 mm.
Does SXRL 10 x 200 FUS include a screw?
Yes. The FUS version is supplied as a complete fixing with a hex-head screw, integrated washer and TX40 drive.
What is the usable fixture thickness?
At an anchorage depth of 50 mm the usable fixture thickness is 150 mm, at 70 mm it is 130 mm, and at 90 mm it is 110 mm.
Which substrates can SXRL be used in?
The ETA covers, among other substrates, concrete from class C12/15, solid brick, vertically perforated brick, aerated concrete and solid and perforated sand-lime masonry units. The detailed scope should be checked in the ETA for the specific fastening.
Is the FUS version suitable for fixing metal components?
Yes. The manufacturer recommends versions with a hex-head screw and integrated washer particularly for fastening metal components.
How many fixings are included in this sales version?
Product 00522726 refers to the factory box containing 50 Fischer SXRL 10 x 200 FUS fixings.
Product safety
Manufacturer
FISCHER POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ
Albatrosów 2
30-716 Kraków, Poland
Responsible person in the EU
FISCHER POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ
Albatrosów 2
30-716 Kraków, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
