Fischer DuoXpand 8 × 120 T frame anchor with countersunk screw, 8 mm drill, 120 mm length, pack of 50
Product code: 00562151
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
Fischer DuoXpand 8 × 120 T is a frame anchor with an innovative expansion zone and a countersunk-head screw. The special rib geometry and material mix deliver secure fixings in concrete, brick and hollow blocks using an 8 mm drill.
Benefits and unique features
- Controlled, directional expansion – reduced cracking risk and closer-to-edge installation.
- Two embedment-depth options – flexible usable length (tfix) for different bases and fixture thicknesses.
- Lateral serrations prevent plug spinning while tightening.
- Pre-assembled countersunk screw sits flush with the surface – clean finish.
- ETA for multiple non-structural fixings in concrete and masonry.
Properties and applications
- Applications: façade/roof substructures, windows, gates/doors, cupboards and hanging kitchen units, beams, TV brackets, wall claddings, metal brackets, cable trays and ducts.
- Base materials (per ETA): concrete ≥ C12/15, solid brick, solid and hollow sand-lime blocks, vertically perforated clay bricks, lightweight concrete blocks, aerated concrete; also dense natural stone and solid gypsum panels.
- How it works: uniform load distribution in solid bases; form-fit anchorage in hollow units while inner webs remain intact.
Technical parameters
| Parameter | Value |
|---|---|
| Drill diameter (d0) | 8 mm |
| Min. hole depth for through-setting (h2) | 130 mm |
| Usable length at hef=50 mm (tfix) | 70 mm |
| Usable length at hef=70 mm (tfix) | 50 mm |
| Anchor length (l) | 120 mm |
| Screw drive | TX30 |
| Screw material | Electro-galvanized steel |
| Packaging / quantity | Folding box / 50 pcs |
| GTIN (EAN) | 4048962440126 |
Storage recommendations
Store dry and cool in the original packaging, away from UV and corrosive atmospheres. Avoid prolonged mechanical loads that could deform the sleeve or screw thread.
FAQ
1) Which drill bit?
Ø 8 mm.
2) Minimum drilling depth for through-setting?
130 mm.
3) Usable lengths (tfix)?
70 mm at hef=50 mm and 50 mm at hef=70 mm.
4) Suitable base materials?
Concrete, solid and hollow masonry as per ETA.
5) Screw drive?
TX30; electro-galvanized countersunk screw.
Product safety
Manufacturer
FISCHER POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ
Albatrosów 2
30-716 Kraków, Poland
Responsible person in the EU
FISCHER POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ
Albatrosów 2
30-716 Kraków, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
