Fischer FPX M8-I aerated concrete anchor with M8 internal thread 1 pc
Product code: 00519022SZT
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
Fischer FPX M8-I – single M8 anchor for aerated concrete
Fischer FPX M8-I is a mechanical steel anchor with an M8 internal thread designed for fastening in aerated concrete. This Melkib sales variant contains 1 anchor, making it suitable when a single fixing is required instead of a full pack.
The full pack containing 25 Fischer FPX M8-I anchors is available from Melkib under code 00519022.
Aerated concrete anchor with M8 internal thread
FPX M8-I has an M8 internal thread that allows the use of a suitably selected threaded element. The anchor expands in four directions and creates an undercut in the aerated concrete, providing stable anchorage in the substrate.
Where can FPX M8-I be used?
The FPX-I system is designed for fastening in autoclaved aerated concrete. It can be used, among other applications, for installing cable trays, pipes, ventilation ducts, railings and handrails, brackets, cabinets and other components requiring a fixing point with an M8 internal thread.
Installation parameters of the M8 version
For FPX M8-I, the manufacturer specifies a drill hole diameter of 10 mm. The minimum drill hole depth is 95 mm and the minimum anchorage depth is 70 mm. The M8 threaded element should be inserted to a depth between 8 and 15 mm.
The anchor is designed for pre-positioned installation. Detailed fixing parameters, spacing, edge distances and permissible loads must be selected in accordance with ETA-12/0456 and the manufacturer's current load tables.
Technical data
| Parameter | Value |
|---|---|
| Manufacturer | fischer |
| Model | FPX M8-I |
| Manufacturer article number of the base product | 519022 |
| Internal thread | M8 |
| Material | steel |
| Coating | electro-galvanized |
| Drill diameter d0 | 10 mm |
| Anchor length | 75 mm |
| Minimum anchorage depth hef | 70 mm |
| Minimum drill hole depth h1 | 95 mm |
| Minimum insertion depth of M8 threaded element | 8 mm |
| Maximum insertion depth of M8 threaded element | 15 mm |
| Substrate | aerated concrete |
| Melkib sales unit | 1 anchor |
| European Technical Assessment | ETA-12/0456 |
| Declaration of Performance | DoP No. 0270 |
Storage
No specific storage temperature range or separate storage conditions for FPX M8-I are stated in the manufacturer data reviewed for this description.
Selection and fastening safety
The load capacity of the fixing depends, among other factors, on the properties of the aerated concrete, substrate geometry, anchor spacing and edge distances. For safety-relevant fixings, use the values specified in ETA-12/0456 and the manufacturer's current load tables.
FAQ
Does 00519022SZT mean one anchor?
Yes. This product contains 1 Fischer FPX M8-I anchor sold individually.
Where can I buy the full pack of FPX M8-I?
The full pack containing 25 anchors is available from Melkib under code 00519022.
What thread does the single anchor have?
FPX M8-I has an M8 internal thread.
What drill bit is required?
The manufacturer specifies a 10 mm drill hole.
How deep should the drill hole be?
The minimum drill hole depth is 95 mm and the minimum anchorage depth is 70 mm.
How far should the M8 threaded element be inserted?
The specified insertion depth of the threaded element is between 8 and 15 mm.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
