Food grade calcium sulfonate complex grease ANDEROL FGCS-2 NLGI 2, NSF H1, Kosher, Halal, heavy duty, 0.4 kg
Product code: MB-0420
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
ANDEROL FGCS-2 0.4 kg is a universal food grade grease based on an over-based calcium sulfonate complex (NLGI 2), designed for heavy duty applications in food processing plants, including conditions with water and elevated temperatures. The grease is NSF H1 registered (incidental food contact) and certified Kosher and Halal. It delivers exceptional load carrying ability, excellent mechanical stability and effective corrosion protection.
Advantages and unique features
- NSF H1 registration + Kosher and Halal certifications – supports food plant compliance and audits.
- Superior mechanical stability, particularly in the presence of heat and water.
- Formulated to resist separation under centrifugal forces.
- Excellent rust prevention properties.
- Excellent load carrying ability and wear protection.
- Excellent resistance to water washout and spray-off.
- Service life is typically increased by two to three times compared to a regular mineral oil based grease.
Properties and applications
- Type: NSF H1 food grade calcium sulfonate complex grease, NLGI 2.
- Applications: heavy duty food-grade applications; lubrication of equipment operating with water and elevated temperatures.
- Resistance: good oxidation and corrosion resistance; excellent water washout resistance.
- Temperature range: long-term -20°C to +160°C; short-time admissible peak up to +200°C.
- DIN designation: KP 2 K-30.
Technical parameters
| Parameter | Value |
|---|---|
| Color | Tan |
| Thickener | Ca-sulfonate complex |
| Type of base oil | White oil |
| NLGI grade | 2 |
| Operating temperature (long-term) | -20°C to +160°C |
| Short-time admissible temperature peak | +200°C |
| Dropping point | 318°C |
| Worked penetration | 265–295 (0.1 mm) |
| Base oil viscosity @ 40°C | Approx. 95 mm²/s |
| 4-ball test welding load | 4000 N |
| Water washout, % lost @ 80°C | 0.3 |
| Bearing life performance @ 1000 rpm, 160°C | 180 h |
| Low temperature torque at -40°C | 11.0 Nm |
| DIN designation | KP 2 K-30 |
| Pack size | 0.4 kg |
Storage recommendations
Store in the closed original container, preferably in protected locations to prevent contamination. If spilled, cover with inert absorbent material and remove, then flush the area with water. Keep away from open flames – the product will burn. Refer to the Safety Data Sheet (SDS) for detailed handling and storage guidance.
FAQ
1) What does NSF H1 mean for ANDEROL FGCS-2?
It is a registration for lubricants suitable for applications where incidental food contact may occur.
2) What is ANDEROL FGCS-2 recommended for?
Heavy duty food-grade applications, especially where water, elevated temperatures and high loads are present.
3) What is the temperature range?
Long-term -20°C to +160°C, with a short-time admissible peak up to +200°C.
4) Why calcium sulfonate complex?
It provides excellent mechanical stability and strong resistance to water washout and corrosion in demanding applications.
Product safety
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
