Synthetic food grade calcium sulfonate complex grease ANDEROL FGCS-2 PLUS NLGI 2, NSF H1, Kosher, Halal, low-viscosity PAO base oil, 0.4 kg
Product code: MB-0422
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
ANDEROL FGCS-2 PLUS 0.4 kg is a universal synthetic food grade grease based on an over-based calcium sulfonate complex (NLGI 2) for heavy duty applications in food processing plants. The grease is NSF H1 registered (incidental food contact) and certified Kosher and Halal. The PLUS variant uses a low-viscosity PAO base oil, which supports performance at low temperatures and in higher-speed applications while maintaining exceptional load carrying ability and strong water resistance.
Advantages and unique features
- NSF H1 registration + Kosher and Halal certifications – supports food plant compliance and audits.
- Low-viscosity synthetic PAO base oil – helps at low temperatures and in higher-speed operation.
- Excellent load carrying ability and wear protection (heavy duty).
- Superior mechanical stability, particularly in the presence of heat and water.
- Formulated to resist separation under centrifugal forces.
- Excellent resistance to water washout and spray-off.
- Excellent rust prevention properties and good oxidation resistance.
- Life performance is typically increased by two to three times compared to a regular mineral oil based grease.
Properties and applications
- Type: NSF H1 food grade calcium sulfonate complex grease, NLGI 2, synthetic PAO base oil.
- Applications: heavy duty food-grade applications in food processing plants, including conditions with water and elevated temperatures.
- Resistance: good oxidation and corrosion resistance; excellent water washout resistance.
- Temperature range: long-term -40°C to +177°C; short-time admissible peak up to +200°C.
- DIN designation: KPHC2K-40.
Technical parameters
| Parameter | Value |
|---|---|
| Color | Tan |
| Thickener | Ca-sulfonate complex |
| Type of base oil | PAO |
| Operating temperature (long-term) | -40°C to +177°C |
| Short-time admissible temperature peak | +200°C |
| Dropping point | 318°C |
| Worked penetration | 265–295 (0.1 mm) |
| Base oil viscosity @ 40°C | Approx. 50 mm²/s |
| 4-ball test welding load | 4000 N |
| Water washout, % lost @ 80°C | 0.5 |
| Bearing life performance, hours @ 1000 rpm, 160°C | 280 |
| Low temperature torque at -40°C | 4.0 Nm |
| DIN designation | KPHC2K-40 |
| Pack size | 0.4 kg |
Storage recommendations
Store in the closed original container, preferably in protected locations to prevent contamination. If spilled, cover with inert absorbent material and remove. Flush the area with water. Keep away from open flames – the product will burn. Refer to the Safety Data Sheet (SDS) for additional handling and storage guidance.
FAQ
1) What does NSF H1 mean for ANDEROL FGCS-2 PLUS?
It is a registration for lubricants suitable for applications where incidental food contact may occur.
2) What is the key benefit of the PLUS version?
It uses a low-viscosity PAO base oil (approx. 50 mm²/s at 40°C), which supports low-temperature performance and higher-speed applications.
3) What is the operating temperature range?
Long-term -40°C to +177°C, with a short-time admissible peak up to +200°C.
4) Is it resistant to water washout?
Yes – it offers excellent resistance to water washout and spray-off, which is important in food plant sanitation environments.
Product safety
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
