Melkib Static mixing tip, static mixer tip for 2K cartridge materials, laminar flow mixing during dispensing, replacement tip, 6.3 g
Product code: MB-0387
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
Melkib Static mixing tip is a static mixing tip designed to mix two-part materials while dispensing from a cartridge. The mixer design supports homogeneous mixing during application in laminar flow conditions. It is a practical replacement tip for resin and other 2K systems where repeatability and convenient application matter.
Advantages and unique features
- Mixes 2K materials directly while dispensing from the cartridge
- Static mixer for laminar flows
- Supports more homogeneous mixing during application
- Replacement part – quick change and back to work
- Low weight: 6.3 g
Properties and applications
- Mixing during dispensing: the tip technology allows two-part materials to be mixed as they are dispensed from a cartridge.
- Mix homogeneity: supports sufficient and more uniform mixing before the material reaches the application surface.
- For 2K resin systems: designed as an applicator tip for two-part materials dispensed from cartridges.
- Fixing applications: as described, suitable for fixing tasks such as wall ties, starter bars, studs, bolts or large screws.
- One-step application: enables mixing and applying in a single action, improving workflow for repetitive tasks.
Technical parameters
| Parameter | Value |
|---|---|
| Type | Static mixing tip (static mixer) |
| Flow regime | Laminar flows |
| Dispensed material | Two-part materials (2K) from cartridges |
| Use | Mixing and dispensing during application |
| Weight | 6.3 g |
Storage recommendations
Store the tips in a clean, dry place away from heat sources and direct light. Protect the mixing channels from contamination. After use, treat the tip as a replacement part—cured material inside the mixer may prevent reuse.
FAQ
1) What is Melkib Static mixing tip used for?
For mixing two-part materials while dispensing from a cartridge—the mixing takes place inside the tip during application.
2) Does it mix material during dispensing?
Yes, as described, it mixes 2-part materials as they are dispensed from a cartridge.
3) What kind of applications is it suitable for?
As described, fixing tasks such as wall ties, starter bars, studs, bolts or large screws.
4) Is it reusable?
It is typically a replacement part—once material cures inside the mixing channel, reuse may not be possible.
5) What is the weight?
6.3 g.
Product safety
Manufacturer
Melkib Klus Raczek Spółka Komandytowa
ul. Stawowa 91
43-400 Cieszyn, Poland
Responsible person in the EU
Melkib Klus Raczek Spółka Komandytowa
ul. Stawowa 91
43-400 Cieszyn, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
