Loctite EA 3463 0.114 kg 2-component epoxy cane / stick with steel filler for emergency repair, versatile, easy to use, high strength, up to 120 ° C, for patching pipes, tanks, filling too large holes and cavities
Product code: 265628
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Select product variant:
Individual variants may differ in price
Secure purchase guarantee
Product description
LOCTITE EA 3463 114G – Metallic Epoxy Putty for Fast Structural Repairs
LOCTITE EA 3463 114G is a two-component, metallic epoxy putty developed by Henkel for fast and durable mechanical repairs and seals. The product cures at room temperature and takes on an appearance similar to steel. It can be used on dry and damp surfaces, and even underwater. Ideal for emergency repairs of pipes, tanks, containers, castings or metal elements.
Applications of LOCTITE EA 3463
LOCTITE EA 3463 is a universal repair putty with high mechanical resistance, ideal for a wide range of industrial and service applications.
- Stopping leaks in pipes and tanks (also underwater)
- Filling damaged threads and bolt holes
- Repairing cracks in castings, containers and machine bodies
- Smoothing welds and surfaces
- Temporary or permanent sealing of industrial installations
Key properties and advantages
- Two-component epoxy mass - easy manual application
- Cures in 10 minutes at room temperature
- Can be used on wet and damp surfaces
- After curing, it takes on a metallic appearance (steel imitation)
- Chemical, thermal and mechanical resistance
- Very good adhesion to metal, ceramics, plastics and other substrates
- For use in workshops, production plants, water and gas installations
Technical parameters
| Property | Value |
|---|---|
| Product type | Two-component epoxy - filling mass |
| Color | Metallic gray (after curing) |
| Appearance | Putty (plastic mass) |
| Mixing ratio | 1:1 (preformed mass) |
| Potency to apply | 2.5 – 5 minutes |
| Gel time | 2.5 – 3.5 minutes |
| Curing time | 10 minutes at 25°C |
| Hardness (Shore D) | >70 |
| Strength at compression | 50 N/mm² |
| Tensile strength | 18.8 N/mm² |
| Bending strength | 37 N/mm² |
| Operating temperature range | -30°C to +120°C |
| Thermal conductivity | 1.016 W/m·K |
| Surface resistance | 110×10¹² Ω |
| Volume resistance | 46×10¹² Ω·cm |
| Package capacity | 114 g |
Storage recommendations
LOCTITE EA 3463 should be stored tightly closed in its original packaging, in a dry and cool place, at temperatures between +8°C and +21°C. Storage below +8°C or above +28°C may permanently affect the product properties. Unused residues should not be returned to the packaging to avoid contamination. It is recommended to wear protective gloves during application. In case of doubt, consult your local Henkel technical advisor.
Product features
- Maximum Operating Temperature in °C 120
- Color Gray
- Minimum Operating Temperature in °C -30
- Adhesive type Two-component epoxy adhesive
- Setting / skin formation time 10 min.
- Strength High
- Open time 3 min.
Product safety
Manufacturer
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Responsible person in the EU
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
