Molykote PG 75 1kg lubricant for plastics based on mineral oil or metal/plastic combinations, long-term lubrication, low coefficient of friction
Product code: 1500875
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Select product variant:
Individual variants may differ in price
Secure purchase guarantee
Product description
Molykote PG 75 1kg
Molykote PG 75 is a high-performance grease designed for the lubrication of plastic/plastic and plastic/metal connections characterized by slow to medium-fast movements and light loads. This product provides long-term lubrication and is compatible with many plastics and elastomers.
Application
- Lubrication of joints in vehicles
- Lubrication of control cables, gears, worms, planetary gears and other plastic/plastic and plastic/metal contacts
- Used in electrical and mechanical devices such as car window mechanisms, roof tracks, HVAC
Properties
- Suitable for long-term lubrication
- Good low temperature properties (used down to -40°C)
- Very low coefficient of friction
- Compatible with many plastics and elastomers
Technical parameters
| Parameter | Value |
|---|---|
| Color | Beige |
| NLGI consistency class | 2 |
| Worked penetration (ISO 2137) | 270-300 mm/10 |
| Density @ 20°C (ISO 2811) | 0.86 g/ml |
| Base oil viscosity @ 40°C (DIN 51 562) | 32 mm²/s |
| Operating temperature range | -40°C to +130°C |
| Dropping point (ISO 2176) | >190°C |
| Starting torque at -30°C (ASTM D1478-80) | 222x10⁻³ Nm |
| Torque after 20 minutes of operation at -30°C | 36x10⁻³ Nm |
| Friction coefficient (steel ball/POM plastic) | 0.02 |
| Oil separation (24h, 100°C) | 3.3% |
Storage and use recommendations
- Store in original, tightly closed packaging, at a temperature not exceeding 35°C
- The product should be stored away from direct sunlight and heat sources
- Shelf life is 60 months from the date of production
- Before use, ensure that surfaces are clean and free from contamination
- Do not mix with other lubricants
Safety
Before use, read the Safety Data Sheet (MSDS). The product should be used in accordance with the manufacturer's recommendations and occupational health and safety regulations. Appropriate personal protection should be used to avoid contact with eyes and skin.
Product safety
Manufacturer
UNIVAR Poland Sp. z o.o.
Sławęcińska 14
05-850 Ożarów Mazowiecki, Poland
Responsible person in the EU
UNIVAR Poland Sp. z o.o.
Sławęcińska 14
05-850 Ożarów Mazowiecki, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
