Synthetic Group III compressor oil ISO VG 68 ANDEROL S-68, for oil flooded rotary screw and centrifugal compressors, very high oxidative & thermal stability, 20 L
Product code: MB-0426
Leave feedback on the product
Related products
Secure purchase guarantee
Product description
ANDEROL S-68 20 L is a synthetic compressor oil (base: hydro cracked / iso de-waxed hydrocarbon base fluids, Group III) for professional industrial compressor lubrication. Its high-performance additive system provides very high oxidative and thermal stability, helping to extend maintenance intervals and reduce downtime. ANDEROL S-68 meets or exceeds DIN 51506.
Advantages and unique features
- Fewer oil changes / extended drain intervals.
- Very high oxidative and thermal stability.
- Wide operating range.
- Lower oil consumption.
- Lower fluid cost per operating hour.
- Power savings over conventional oil (up to 4%).
- Increases maintenance intervals.
- Mineral-oil-like compatibility with paints, seals, gaskets and hoses – easy changeover.
Properties and applications
- Applications: oil flooded rotary screw compressors.
- Applications: centrifugal compressors.
- Applications: other applications requiring an oxidation resistant lubricant.
- Normal operating temperature range: -20°C to 180°C.
- Viscosity grade: ISO VG 68.
Technical parameters
| Parameter | Value |
|---|---|
| Viscosity grade | ISO VG 68 |
| Appearance @ 20°C | Clear Yellow Liquid |
| Kinematic viscosity @ 40°C | 69.4 mm²/s |
| Kinematic viscosity @ 100°C | 10.5 mm²/s |
| Viscosity index | 139 |
| Density @ 15°C | 0.861 kg/l |
| Total acid number (TAN) | 0.07 mg KOH/g |
| Flash point | 240°C |
| Pour point | -33°C |
| Demulsibility @ 54°C | 10 min |
| Sulphated ash | 0.02% |
| % CRC of 20% dest | 0.07 |
| % CRC after air / Fe2O3 ageing (Pneurop test) | 0.5 |
| Standards / classification | DIN 51506 |
| Pack size | 20 L |
Storage recommendations
Store in the closed original container in a dry place, away from heat sources and direct sunlight. Prevent contamination (dust, water) during transfer. Refer to the Safety Data Sheet (SDS) for detailed handling and storage guidance.
FAQ
1) Which compressors is ANDEROL S-68 suitable for?
Oil flooded rotary screw compressors, centrifugal compressors and other applications requiring an oxidation resistant lubricant.
2) What is the normal operating temperature range?
The manufacturer states a normal operating range of -20°C to 180°C.
3) What does ISO VG 68 mean?
It is the viscosity grade; for ANDEROL S-68 the kinematic viscosity at 40°C is 69.4 mm²/s.
4) Is changeover from mineral oil complicated?
The manufacturer indicates mineral-oil-like compatibility with common materials, so special compatibility precautions are generally not required.
Product safety
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
